Solutions | Headlight

• Headlight-1.jpg

  Old reflector with socket for one filament bulb.

  http://martijnfokke.nl/mgmmm/images/Solution-pictures/enlarge/Headlight-1.jpg

• Headlight-2.jpg

  Socket for a two filament bulb.

  http://martijnfokke.nl/mgmmm/images/Solution-pictures/enlarge/Headlight-2.jpg

• Headlight-3.jpg

  Connection for dipped headlights and headlights.

  http://martijnfokke.nl/mgmmm/images/Solution-pictures/enlarge/Headlight-3.jpg

• Headlight-4.jpg

  Bulb,  ct 12237 BA15D,  12v-45/40 W.

  http://martijnfokke.nl/mgmmm/images/Solution-pictures/enlarge/Headlight-4.jpg

Solutions | Firewall rubber mounting 1

• Fire wall-1.jpg

  Firewall corner with rubber.

• Fire wall-2.jpg

  Cut away the unnnecessary part.

• Fire wall-3.jpg

  Front side.

• Fire wall-4.jpg

  Back side.

Solutions | Cilinderhead bolts & tools

• Engine head-1.jpg

  Normal cilinderhead bolts an nuts.

• Engine head-2.jpg

  New and old nut, same thread, different spanner size.

• Engine head-3.jpg

  New nuts and shortend studs.

• Engine head-4.jpg

  Modified tools.

Solutions | Regulator rail

• rail-1.jpg

  Rail behind dashbooard.

• rail-2.jpg

  Flasher, fuse box, regulator.

• rail-3.jpg

  If needed, junction box.

• rail.jpg

  Drawing

Solutions | Steering wheel clamp

• Streering Wheel-1.jpg

  J4, removable  steering wheel.

• Steering Wheel-2.jpg

  Steering wheel center with clamp.

• Steering Wheel-3.jpg

  Put the steering wheel on.

• Steering Wheel-4.jpg

  Turn the clamp over to fasten the wheel.

Solutions | Firewall rubber mounting 2

• fire wall rubber-3.jpg

  Firewall middle with rubber.

• fire wall rubber-4.jpg

  The place where the bonnet hinge has to put the rubber down.

• fire wall rubber-8.jpg

  Cut away the inner bridge for about  8 cm.

• fire wall rubber-11.jpg

  It is much easier now to press the rubber down.

Solutions | Rivets alternative

• rivet-1.jpg

  Original the parts were riveted.

• rivet-5.jpg

  Alternative for the rivets.

• rivet-6.jpg

  The parts srew together.

• rivet-7.jpg

  See: drawings bodywork - 29.

Solutions | Bucket seat mounting

• bucket seat-1.jpg

• bucket seat-2.jpg

• bucket seat-3.jpg

• bucket seat-4.jpg

• bucket seat-5.jpg

Solutions | Brake cable adjustment

• Brake cable-1.jpg

  Standard brake cable.

• brake cable-2.jpg

  When adjusting the brake cable the outer cable turns most of the times.

• brake cable-3.jpg

  Place this bracket over the brake cable.

• brake cable-4.jpg

  The brake cable is now easier to adjust.

Solutions | Steering wheel bolts

• oud.jpg

  Original steering wheel spokes connected with wood screws .

• een.jpg

  Steering wheel tube with steel plug.

• twee.jpg

  Plug with screw thread.

• drie.jpg

  Spoke connected with bolt.